When you think of plumbing, do you just see it as a hidden and mysterious network of pipes and pumps that makes your toilets and sinks work? If so, then you are very unlikely to have a go at mauntaining or repairing the system. Plumbing is not actually that complicated, and there are many things that you can do yourself to maintain and repair your system. Read on to find out how.
Avoid plumbing problems! Do not stop up the toilet! Some common items that will stop up a toilet include: toys, hair, paper towels, birth control items, and feminine personal products. Do not flush these items down your toilet – unless the instructions say otherwise! These can stop up your toilet – to the point that nothing else will work – except calling a plumber!
Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.
The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.
When starting a plumbing project that is due to loud noises in your pipes empty the pipes first. This can be an easy fix to an other wise wasted huge job. Just close the main water line and open the facets throughout the house. After the water has stopped flowing turn the water on from the main source and check to see if the noise is eliminated.
To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.
Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.
You can pour baking soda down a drain followed by some vinegar if you want to keep drains clear. This should be done once a month, and a cup each of baking soda and vinegar should be used. Plug up the drain and allow the chemical reaction to occur. Wait for a little while, and then pour boiling water down the drain. Doing this will help rid your pipes of disgusting soap scum and blockages.
Run lots of cold water whenever you use your garbage disposal. The cold water keeps your blades sharp, which helps your disposal run smooth. If you use hot water, any grease that is in the disposal will turn to liquid, and sit inside of the drain, which can clog your pipes.
It should not be necessary to call out a professional for every repair job. If you take your time and apply sensible advice, such as what you read here, you can successfully repair many of the common faults that develop. It may take a longer the first few times, but after a few successes you will pick up speed.