Plumbing has so many possibilities as to what you can use, do, and how you can apply it to your own plumbing jobs. It is rare to find somebody that has plumbing needs just like you, so why not take advantage of that and perfect your own? This article can help you.
Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.
Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.
Don’t pay a plumber until the job is completed. A plumber may require some money upfront, but it’s wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.
If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.
Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.
Regularly check your overflow holes to make sure they’re not clogged. Overflow holes are one of those things which you forget about until you need them. As you routinely look for things needing attention, check to be sure that the overflow holes are clear and unblocked.
It is not always necessary to call in a plumber when you have a damaged section of pipe in your plumbing. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.
Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.
Isn’t doing your own plumbing a lot of fun? As you have seen in this article, there are a lot of ways this can be done and no two techniques or equipemnt will yield the same results. There are also lots of customizable options that can work with your home and budget.